FSD’s bolt on traction bar frame mounts are the easiest way to install a set of traction bars on your truck. These will bolt onto to your 3” frame seamlessly giving you a way to attach a traction bar with a firm grip. Our mounts ensure zero movement under load & are built with the strongest of materials right here at our shop in Bangor, PA. Light drilling is required, see the installation instructions below. 

  Features:

• No Welding
• Grade 8 Hardware Included 
• Laser Cut 
• CNC Bent 
• 1/4” Mild Steel Construction 
• Lifetime workmanship warranty 
• Made in the USA 
• 304 Stainless Steel Overlays

Fitment: 

• Fits 3” Wide boxed Frames
• 2 5/8” Inside Mounting Width for 2 5/8” Heim Joints
• 3/4” Traction Bar Mounting Bolts 

For traction bars with a 2 5/8” mounting width & a 3/4” bolt hole.

What’s Included ? 

• (2) 3” Frame Mounts 
  
• (10) 3/8” x 1” Flange Bolts
• (10) 3/8” - 16 Threaded Inserts
  
• (2) Grade 8 3/4”-10 x 5” Long Bolts 
• (2) Grade 8 3/4”-10 Nylon Lock Nuts 
• (4) Grade 8 3/4” Washers
• (2) 304 Stainless Steel Overlays

Frame Mount Installation:

• Hold the frame mount up where you would like to mount it.
• Mark & drill the top 3 holes using a 17/32nd Drill bit (0.531”). 
• Install the (3) 3/8” -16 Nutserts.
• Bolt the bracket to the frame using the (3) 3/8" Bolts.
• Make sure that there are no gaps between the bracket & frame.
• Mark & drill the bottom 2 holes using a pilot bit.
• Remove the top 3 bolts.
• Remove the bracket 
• Drill the 2 bottom holes using a 17/32nd Drill bit (0.531”).
• Install both bottom threaded inserts using a threaded insert tool.
• Reinstall bracket loosely
•  Evenly tighten all 5 bolts using red high strength lock tight.
• Repeat on the other side.

NOTE: Brackets come raw steel & need to be painted or Powdercoated. Pictures are for visual purposes only.